היי,
ברשותי NUC עם מערכת הפעלה 8.1 ואני מעוניין שכשאשר אני לוחץ על כיבוי בHARMONY ONE או כל שלט אחר המחשב יבצע כיבוי מלא ולא SLEEP MODE?
לשאלתי איך ניתן לבצע זאת
תודה מראש אסף
הגדרת SLEEP MODE ככיבוי בשימוש Harmony one
- asafalfa (פותח השרשור)
-
- חבר פעיל מאוד
- הודעות: 388
- הצטרף: מאי 2006
- מיקום: רעננה
- נתן תודות: 15 פעמים
- קיבל תודות: 24 פעמים
·eyali123 כתב:למה להכביר במילים...
אני מצטער אבל להדליק ולכבות מערכת הפעלה\מחשב אני יודע. הבעיה היא כאשר מבצעים את זה דרך השלט, שם הוא מוגדר רק עם היכולת להכניס לSLEEP MODE ...
מה שאני רוצה לדעת זה איך להגדיר דרך הרגיסטרי את הSLEEP MODE ככיבוי ...
נכון לרגע זה אין כלל אפשרות כזו בהגדרות
תנסה את הפתרון שמוצע כאן .asafalfa כתב:
·......
פה בדיוק הבעיה שלי ... אני צריך שלחיצה על SLEEP תעשה כיבוי ולא מצב SLEEP.. כל מצב אחר לא רלוונטי שם ...
ושלט הארמוני לא יודע לכבות מחשב ללא שימוש בSLEEP MODE.
אלה אם משהו כאן יודע אחרת...
אני מציע שתגבה את הרגיסטרי על כל צרה שלא תבוא, עוד לפני שאתה מתחיל לשנות בו ערכים.
תכין קובץ bat קטו עם הפקודה:
@echo off
shutdown /s
או נסה את זה
It now works perfect for me, also when it comes to shutting down.
Thought my Harmony setup is a bit different, as i rely on NEC with my amplifier and TV.
Im currently only using my Harmony control towards the NUC with no other devices.
The only problem is the "off" button wich puts my NUC to sleep (not shutting down)
1. create a NUC activity
2. configure the OS to start without user prompt and autostart XBMC
Always shut down the NUC from inside the OS - i.e. go to shut down system inside XBMC with your Harmony.
To power up and use the control again, simply press the activity button, this means never using "off".
Works like a charm everytime, but will not work if you have other devices in the same NUC activity, as Harmony will not detect you shutting down from the OS
@echo off
shutdown /s
או נסה את זה
It now works perfect for me, also when it comes to shutting down.
Thought my Harmony setup is a bit different, as i rely on NEC with my amplifier and TV.
Im currently only using my Harmony control towards the NUC with no other devices.
The only problem is the "off" button wich puts my NUC to sleep (not shutting down)
1. create a NUC activity
2. configure the OS to start without user prompt and autostart XBMC
Always shut down the NUC from inside the OS - i.e. go to shut down system inside XBMC with your Harmony.
To power up and use the control again, simply press the activity button, this means never using "off".
Works like a charm everytime, but will not work if you have other devices in the same NUC activity, as Harmony will not detect you shutting down from the OS
- asafalfa (פותח השרשור)
-
- חבר פעיל מאוד
- הודעות: 388
- הצטרף: מאי 2006
- מיקום: רעננה
- נתן תודות: 15 פעמים
- קיבל תודות: 24 פעמים
·Lee כתב:תנסה את הפתרון שמוצע כאן .......
אני מציע שתגבה את הרגיסטרי על כל צרה שלא תבוא, עוד לפני שאתה מתחיל לשנות בו ערכים....
קצת באיחור אבל לצערי לא היה לי זמן לשחק עם זה עד עכשוי, בכל אופן תודה על העזרה עשיתי את כל הצעדים שצויינו שם חוץ מהצעד האחרון שלצערי אני לא רואה שיש לי
"Then, you go back to the Control Panel:
Control Panel\All Control Panel Items\Power Options\Change when the computer sleeps\
and click on: Restore default settings for this plan"
לי אין את האופציה שנקרא restore default settings for this plan ניסיתי למצוא משהו דומה אבל החלון הזה בסך הכל מגדיר לי מה לעשות לאחר זמן מסויים עם המסך או האם להכנס את המחשב למצב שינה אחר מס דקות...
אשמח לעזרה בנושא ....
****************** קבל תיקון הצלחתי עכשיו ... עובד כמו שצריך .
תודה !
נערך לאחרונה על ידי asafalfa ב 09/05/2015 21:53, נערך פעם 1 בסך הכל.
- asafalfa (פותח השרשור)
-
- חבר פעיל מאוד
- הודעות: 388
- הצטרף: מאי 2006
- מיקום: רעננה
- נתן תודות: 15 פעמים
- קיבל תודות: 24 פעמים
אופציה ראשונה זה להפעיל סקריפט על פעם שאני רוצה לעשות כיבוי .. מה שלא נוח ביוחד .. באיחוד שאתה רוצה לבצע את כל זה בלחיצת כפתור אחת.eyali123 כתב:תכין קובץ bat קטו עם הפקודה:
@echo off
shutdown /s
או נסה את זה
It now works perfect for me, also when it comes to shutting down.
Thought my Harmony setup is a bit different, as i rely on NEC with my amplifier and TV.
Im currently only using my Harmony control towards the NUC with no other devices.
The only problem is the "off" button wich puts my NUC to sleep (not shutting down)
1. create a NUC activity
2. configure the OS to start without user prompt and autostart XBMC
Always shut down the NUC from inside the OS - i.e. go to shut down system inside XBMC with your Harmony.
To power up and use the control again, simply press the activity button, this means never using "off".
Works like a charm everytime, but will not work if you have other devices in the same NUC activity, as Harmony will not detect you shutting down from the OS...
אופציה השני היא גם לא טובה כי כמו שהוא צייין אני מפעיל כאן מספר דברים ככה שלעשות כיבוי דרך קודי לכל המערכת בלי שזה עושה לי כיבוי למגבר ולשאר הדברים זה סתם כאב ראש·